ACN IRIS X Installationsanleitung PDF herunterladen (Seite 48)

I am having problems with Wi-Fi

1. Verify your Internet connection is working properly by browsing to your favorite website with a wired computer

on the same network router.

2. Connect your IRIS X via wired connection to your network; ensure your IRIS X can function via a wired

connection.

3. If the IRIS X works on a wired connection and not via Wi-Fi, verify your Wi-Fi is working by browsing to your

favorite web site with a wireless computer on the same network router. If you are able to connect and browse

using a wireless computer, you will need to configure your IRIS X Wi-Fi settings:

• Press the Systems Settings Icon on the Task Bar

• Press the Network button, then the Wi-Fi tab

• Ensure the Enable button is selected and press Apply

• Press the Scan button, and press twice on the desired SSID (Wi-Fi network)

 If no key is required, go to step 6

• Enter the appropriate key using the on-screen key pad and check the Save Key check box

• Exit back to the Home Screen Press

• Press the Status Bar in the top right to access the Status Bar drop-down menu, Press Wi-Fi to enable

Wi-Fi. Press Hide to close this drop down menu.

Note: It may take 30-60 seconds for the IRIS X to connect to your network and register.

Your Wi-Fi connection is working if you have the Wi-Fi icon on the top of the home screen, the icon is green on

the top right of the Info widget, and you have an IP address in the bottom line of the Info widget.

Additional Wi-Fi troubleshooting actions for the IRIS X:

1. Make sure Wi-Fi is on. Go to the Home screen and click on the top right Status Bar. Slide the Wi-Fi On/Off

indicator to On.

2. In the IRIS X Wi-Fi menu, click Scan, double click the desired ESSID, click Save.

3. In the IRIS X Wi-Fi menu, click Scan, double click the desired ESSID, un-check Save Key. Re-enter the

appropriate security key, check Save Key, click Save.

4. In the IRIS X Wi-Fi menu, disable Wi-Fi and then click apply.

5. Enable Wi-Fi, click apply again and then click Save.

6. Reboot the IRIS X.

7. Your Wi-Fi connection is working if you have the Wi-Fi icon on the top of the home screen, the icon is green

on the top right of the Info widget, and you have an IP address in the bottom line of the Info widget.

I am having problems with my network

1. Verify your Internet connection is working properly by browsing to your favorite website with a wired computer

on the same network router.

2. Insert an Ethernet Cable connected to a network into the IRIS X Network Port.

3. Press the Status Bar in the top right to access the status bar drop-down menu.

4. Press Network to enable wired networking. Press Hide to close this drop down menu.

5. Remove and reinsert the Ethernet cable from the back of the IRIS X.

I cannot make or receive calls?

Verify the device was properly installed. (See Quick Installation Guide.)

Check to ensure the Power Adapter is securely connected to the back of the IRIS X.

If too many applications or widgets are open, the IRIS X may become sluggish or lose registration. A maximum of

10 total widgets can be open at any one time. Only 3 instances of each widget can be open, with the exception of

the Contacts widget which only permits one instance. To close a widget, press and hold on the widget until the

close option appears. Press the close option.

You may have to adjust your router. The IRIS X communicates with the ACN network over UDP ports 5065 and

9000-9020

1 2 ... 43 44 45 46 47 48 49 50 51 52 53

Kommentare zu diesen Handbüchern

Keine Kommentare

ACN IRIS X Installationsanleitung Seite 48

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Telefone ACN IRIS X